Builder Gel Diana

Builder Gel - a premium quality, low-temperature gel for modeling.

• It can be used in both one-phase and three-phase systems.
• The hard gel allows for creating a strong coating, building the proper architecture, holding the arch well, and not deforming.
• It allows for working without dust. It is suitable for extension on lower forms, extension in techniques without/with minimal dust, correction of extension, modeling of nail plates, and nail reinforcement.

• Perform standard nail preparation: remove previous coating, buff the surface, shape nails as desired, and perform a manicure.
• Apply DNKa' Ultrabond - acid-free primer for additional adhesion.
• Apply DNKa Rubber/Fiber Base with rubbing motions. Cure in a UV lamp for 1 minute or in an LED/hybrid lamp for 30 seconds.
• Cut and place the nail form under the natural nail.
• Apply the chosen DNKa gel in a thin, free edge-mimicking layer and cure in a UV lamp for 90 seconds or in an LED/hybrid lamp for 60 seconds.
• Perform filing of the free edge and degrease with a degreasing agent.
• Apply the chosen DNKa' gel in a leveling layer and cure in a lamp for 10 seconds. Then press down the arch of the nail extension and cure in a UV lamp for 90 seconds or in an LED/hybrid lamp for 60 seconds.
• Apply DNKa' top coating and cure in a UV lamp for 90 seconds or in an LED/hybrid lamp for 60 seconds.

• Avoid contact with eyes and skin.
• Keep away of children.
• Close the container tightly to preserve the product.

The time it takes to receive your order depends on the shipping method chosen at checkout.